Find My Car

2012 Hyundai Santa Fe Brake Light Bulbs

Check the engine, size and position shown for each product before ordering.

As an Amazon Associate I earn from qualifying purchases.

Philips 1157 LongerLife Brake/Tail Light Bulbs, 2 Pack

1157 · rear brake/tail lamp · replaceable dual-filament brake/tail bulb on supported incandescent-equipped vehicles. Use one bulb per serviced position; matched left/right replacement is recommended. Exclusion: verify factory LED rear-lighting equipment before ordering.

Fitment & product details

1157 incandescent brake/tail replacement. Two clear dual-filament 1157 incandescent bulbs.

Confirm the exact year, model, brake/tail lamp position, bulb number printed on the removed bulb, package quantity, factory incandescent rear-lamp assembly, and current Amazon vehicle checker. Do not install in a sealed factory LED lamp assembly.

Full product details
Vehicle fitment, specifications & installation

What to verify

  • Brake/tail lamp position and bulb number
  • Replaceable incandescent socket versus sealed factory LED assembly
  • Package quantity and whether the rear turn signal or high-mount stop lamp is a separate light source

Installation guidance

Switch the exterior lights off and follow the owner’s procedure to remove the rear lamp or access panel. Replace matched left/right incandescent bulbs when practical, avoid touching the glass with bare fingers, reinstall the socket securely, and have another person confirm tail, brake, turn, and hazard operation before driving.

Other parts for this vehicle

Continue shopping researched categories for the same year, make, and model.

Other model years & common questions

Nearby model years

Use the exact year page even when the same product family spans several years.

Frequently asked questions

What brake-light bulb is mapped to the 2012 Hyundai Santa Fe?

1157 · rear brake/tail lamp · replaceable dual-filament brake/tail bulb on supported incandescent-equipped vehicles. Use one bulb per serviced position; matched left/right replacement is recommended. Exclusion: verify factory LED rear-lighting equipment before ordering. Verify the rear-lamp position and whether the selected trim instead uses a sealed factory LED assembly.

Can the same vehicle use both bulbs and factory LED brake lights?

Yes. Lighting equipment can vary by trim or option package. Use this page only for the saved replaceable-incandescent configuration; a sealed LED assembly requires assembly-specific service.

Does one brake-light bulb also operate the tail light or turn signal?

Sometimes. A dual-filament rear combination bulb can serve more than one function, while another vehicle may use separate bulbs. Follow the saved position note and the number printed on the removed bulb.

Should brake-light bulbs be replaced in pairs?

Matched left/right replacement is usually sensible because bulbs age together, but first check how many bulbs the rear assemblies use and how many are included in the Amazon package.