Check the engine, size and position shown for each product before ordering.
As an Amazon Associate I earn from qualifying purchases.
High beam · H1 · halogen high beam.
standard replacement. H1 halogen replacement for the saved beam positions and factory halogen configurations.
Confirm the exact year, model, beam position, bulb number printed on the removed bulb, factory halogen housing, trim, and current Amazon vehicle checker. Do not use in a factory HID or LED headlamp assembly.
Full product detailsLow beam · H11B · halogen low beam. Exclusion: factory HID headlamps are excluded.
standard replacement. H11B halogen replacement for the saved beam positions and factory halogen configurations.
Confirm the exact year, model, beam position, bulb number printed on the removed bulb, factory halogen housing, trim, and current Amazon vehicle checker. Do not use in a factory HID or LED headlamp assembly.
Full product detailsConfirm your engine, trim and original part before ordering. Fitment disclaimer
Switch the lights off, allow the housing to cool, and disconnect power as the owner’s procedure requires. Handle halogen bulbs only by the base. HID systems use high voltage; follow the service manual or use a qualified technician. Replace matched light sources in pairs when practical and verify beam operation before driving.
Continue shopping researched categories for the same year, make, and model.
Use the exact year page even when the same product family spans several years.
High beam · H1 · halogen high beam. Low beam · H11B · halogen low beam. Exclusion: factory HID headlamps are excluded. Confirm the beam position and whether the vehicle has factory halogen, HID, or a sealed LED assembly.
Yes. Trim and lighting packages can change a vehicle from replaceable halogen bulbs to HID/Xenon or a factory LED assembly. Match the saved factory-lighting note and the number printed on the removed light source.
Do not assume an LED retrofit is road-legal or optically compatible. Use only the light-source type mapped to the factory housing.
No. Match the exact D1S or D3S marking, ballast system, and factory service information; the two types are not interchangeable.